YGL Coal Fired Thermal Oil Boiler

Description

YGL type vertical biomass coal-fired heat-conducting oil heating furnace, also known as heat-conducting oil furnace, uses coal and biomass as fuel, uses heat-conducting oil as medium, and has low-pressure and high-temperature working characteristics. It is characterized by wide application range, advanced technology and reasonable structure. Small volume, low investment in boiler room, easy to install, closed loop heating, high heat utilization rate, heating temperature can reach 310 °C liquid phase; can obtain higher working temperature under lower operating pressure. The liquid phase transports heat energy, and the heat carrier is 70-80 times smaller than the saturated steam pressure of water at <300 degrees Celsius, and the oil is not easily frozen in cold regions. Especially in the production occasions where uniform and stable heating is required and the flame is not allowed to be directly heated, it can replace the water-based steam boiler heating in the water-poor area.

Ygl Coal Fired Thermal Oil Boiler

Equipment Selection

Model		YGL-120	YGL-240	YGL-350	YGL-470	YGL-700	YGL-1000	YGL-1200	YGL-1400
Heat capacity	Kcal	10	20	30	40	60	80	100	120
Heat power	Kw	120	240	350	470	700	1000	1200	1400
Heat efficiency	%	65	70	73	73	76	76	76	76
Design pressure	Mpa	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6
Design temperature	℃	320	320	320	320	320	320	320	320
Oil volume	m3	0.09	0.22	0.28	0.38	0.59	0.75	0.9	1.3
Oil circulation	m3/h	12.5	20	40	60	100	100	100	100
Connection size	mm	50	80	80	100	100	125	125	125
Installted Power	Kw	4	8	11	15	18	22	22	28

YGL Coal Fired Thermal Oil Boiler

Scraper Evaporator

YYQW Oil Gas Fired Thermal Oil Boiler

DZL Biomass Fired Steam Boiler